,

WPC Embossing Machine

The machine is suitable for PVC, PE,PP and other WPC panels, bamboo, composite panels, wood panels, fiberboard, foam board and other outdoor, indoor decorative embossing plate, embossed by this machine, it obtained three-dimensional , increase the beauty, improve product quality.

– Put embossing machine into flat ground.
(Four bottom no need to fix, cause the weight of embossing machine is almost 1 T)
– The connection way of wire: Three-phase, four wire.
– Hydraulic pressure station should be filled with hydraulic oil.

Operation steps

– Adjusting the level of embossing roller

Before start embossing, please adjust the level of embossing rollers first by adjusting the screw and the manual screw rod on the two side shoulders top.

– Machine Operation
First press “start” to rotate the roller, then turn on “heating switch” by clockwise direction. When the temperature reach set value and after keeping warm 15 minutes(100-120℃), plastic lumps can be fed to embossing roller for starting embossing

Maintenance

The lifting up-down track of embossing roller should be lubricated with grease or engine oil.(About every two weeks)

pa_brand

29

Reviews

There are no reviews yet.

Be the first to review “WPC Embossing Machine”

Your email address will not be published. Required fields are marked *

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.